Sayed Steel, Safats, Kuwait is a trusted manufacturer and supplier of SA 516 GR.60N NACE and HIC Plates. We provide high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. With high strength, durability and corrosion resistance. Our plates undergo rigorous quality checks including impact, hardness and ultrasonic testing. To meet industry requirements. With commitment to precision and reliability we provide high-quality steel solutions tailored to meet different industrial requirements.
SA 516 GR.60N NACE and HIC Plates are high-end carbon steel pressure vessel plates designed for sour service use, offering best resistance to hydrogen-induced cracking (HIC). The plates are made with Carbon (0.21%), Manganese (0.79-1.30%), Phosphorus (≤0.025%), Sulfur (≤0.002%) and Silicon (0.13-0.45%). Offering the best toughness and strength. Adhering to NACE and HIC norms, they can be used in high pressure vessel, storage tanks, and critical applications in corrosive environments.
| Grade | ASME SA 516 GR.60N Boiler and Pressure Vessel Steel Plates |
|---|---|
| Width | 1000mm-4500mm |
| Thickness | 5mm-150mm |
| Length | 3000mm-18000mm |
| Supply Condition | As Rolled, Normalized Rolling, Furnace Normalizing, Vacuum Degassing, Simulated Post-Weld Heat Treatment or as per customer requirement. |
| Impact tested | 52° C |
| Tempering | Notch toughness can be improved by quenched cooling from hot rolling or normalizing by the supplier. If such a faster cooling rate is agreed upon between purchaser and supplier then the steel is also to be tempered at 1200 F. |
| Applications | Used for weld fabrication of pressure vessels that require improved notch toughness for lower than ambient temperature service. |
| Process of Manufacturing | Hot-Rolled (HR) |
| C | Si | Mn | P | S | Al | Cr | Cu | Ni | Mo | Nb | Ti | V |
| 0.20 | 0.4 | 0.95/1.50 | 0.025 | 0.025 | 0.02 | 0.3 | 0.3 | 0.3 | 0.08 | 0.01 | 0.03 | 0.02 |
| Tensile strength | Yield strength | Elongation min, % 200 mm (8 in) | Elongation min, % 50 mm (2 in) |
| 415-550 MPa | 250 MPa | 21 | 25 |
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
| British Standard | European Norm | ASTM/ASME | DIN |
| BS1501-161-430A | EN10028 P265GH | A/SA516 – Grade 60 | DIN 17155 HII |
Jaxon Steel is a trusted manufacturer and supplier of high-quality SA 516 GR.60N NACE and HIC Plates​ in Safat, Kuwait. We specialize in premium steel products, including Alloy Steel, Carbon Steel, Mild Steel and Galvanized Steel, with a strong focus on Carbon Steel Sheet and Plates. Our extensive inventory also includes Pipes, Tubes, Flanges, Forged Fittings and Bars. Committed to fast delivery and exceptional customer service, we use only the finest raw materials to ensure superior strength, durability and performance for critical industrial applications. Contact us today for all your SA 516 GR.60N NACE and HIC Plates​ needs!
SA516 GR.60N NACE and HIC Plates are engineered to be used in pressure vessels, storage tanks, and heat exchangers where the resistance to hydrogen-induced cracking is required. These plates are widely used in oil and gas, petrochemical, chemical processing and power industries. Where sour gas conditions and corrosive atmospheres pose a risk. Their excellent mechanical properties and NACE and HIC compliance make them suitable for use at high-pressure and high-temperature in offshore platforms, refineries, and industrial plants.
Sayed Steel is a leading manufacturer, supplier and exporter of high-quality Carbon Steel, Alloy Steel, Mild Steel and Galvanized Steel products. Our extensive product range includes Pipes, Tubes, Flanges, Pipe Fittings, Forged Fittings, Sheets and Plates, catering to various industries in Safat, Kuwait.
Copyright 2025 Sayed Steel. All rights reserved
